> Adopts high speed structure to reduce cycle time for every one bale.

> Long warranty time of the baler machine, you are no need to worry about the after-services.

> 24 hours reply, video, phone call, email support, if any question, we response at first time.

> Latest design of the machine to let you use the best the machine all the time.

> Adopts pre-press structure to keep high output capacity with high density.

> Enough spare parts with lower cost to keep the machine non-stop.

FAQ:

> What is voltage of Y83-250 Metal Chips Briquetting Press?

For the voltage of the machine, no need to worry about that, we will customize the motor per your local voltage and frequency, and the important thing that the briquetting machine must need 3 phases electrical power supply.

> How much pressing force of Brass Chips Briquetting Press?

The pressing force of the briquetting machine is different depends on which model will you need, if you have small capacity, and small bale size and bale weight, then small briquetting is Ok for you, and the pressing force is small accordingly, such as 100tons or 125tons.

> How can we install the Prab Aluminum Briquetting Machine?

The briquetting machine is marked tips when shipping, and you can easily assemble the machine per the tips, after assembling, put it on the horizontal ground, adding hydraulic oil, connect to the power supply, then test and operate the machine per user manual, that is ok, if you have any questions, you can contact with us any time.

> How long is the non-load cycle time of Briquetting Machine Metal Chips Briquette Press?

The single non-load cycle time is approx. 60 seconds, and we can make it faster or lower according to your requirement, such as 30 seconds one bale, or 90 seconds for one bale.

> What are all the skills required to operate a Aluminum Scrap Shavings Chips Briquette Machine manufactured by Diloya?

No special skills, just read the user manual carefully before operating the briquetting machine, if you have any questions, feel free to contact with us, we can help you at any time.